Auxiliary LED Reverse Lights (Integrated Rear Bumper)

[JT LIFE]

Got the email last night, text this morning, and lights should be here Friday!
Now hopefully no problems with the wiring harness and install this weekend...

Sponsored

 

[cecaa850]

Putting mine in this morning. I agree with the previous poster that had to cut half of one upper guide pin off. I have a Sport S stock bumper. It won't go in without doing that. I'm wiring mine to aux 4.

 

[GladnotSad]

Running mine to an Aux as well. What did you use for the ground? did you find anything in the back?

I'd love a "For Dummies" how to wire these to an OEM Aux switch.

 

[cecaa850]

Didn't order the harness. Wanted them independent of the reverse lights. I never use spade connections. Always cut them off, solder and heat shrink.

 

[cecaa850]

I'd love a "For Dummies" how to wire these to an OEM Aux switch.

Nothing to it. Find the bundle under the hood by the battery. Choose one of the two small wires. Run a wire from there under the vehicle tie strapping along the way. Tie that wire to the left and right red wires coming off the lights. Tie the black wires coming off the lights together and run it to a ground. Select battery hot or key hot in the settings area of the radio depending on how you want them powered.

 

[eaglerugby04]

Nothing to it. Find the bundle under the hood by the battery. Choose one of the two small wires. Run a wire from there undervthevvehicle tie strapping along the way. Tie that wire to the left and right red wires coming off the lights. Tie the black wires coming off the lights together and run it to a ground. Select battery hot or key hot in the settings area of the radio depending on how you want them powered.

Is there a good ground in the back? I was poking around back there and nothing stood out as great

 

[cecaa850]

Is there a good ground in the back? I was poking around back there and nothing stood out as great

Well, a self tapper into the frame always works but i just used the black wire on the back of the trailer plug.

 

[rr11]

My lights just showed up! Box was a little beat up but the lights look great. Now if the rain will stop so I can install them.

 

[ORACLElights]

@ORACLElights tough crowd here! Nicely defended.

Ha, thanks! Just want us all on the same page and getting back to enjoying new lighting ?

-Rachel

 

[ORACLElights]

Loving all your photos! Who all is planning on installing this weekend? ?

-Rachel

 

[Erievon]

My harness is scheduled to arrive today, if so, install this weekend!

 

[am1978]

Mine don’t arrive until Tuesday. ?

 

[cecaa850]

Loving all your photos! Who all is planning on installing this weekend? ?

-Rachel

Cant wait to share photos of my tail lights.....

 

[rr11]

Having the same issue looked at Oracle's video and the rear bumper they do the install on does not have the clip that secures the tread plate on the bumper. That's a bummer I don't to cut my new lights. They will not mount on a Sport S bumper with out mods.

 

[unsocbl]

Having the same issue looked at Oracle's video and the rear bumper they do the install on does not have the clip that secures the tread plate on the bumper. That's a bummer I don't to cut my new lights. They will not mount on a Sport S bumper with out mods.

My Mojave is the same...I didn't do much of an investigation on how to back that screw out (it may be possible) as I wasn't at all concerned about taking about 1/4" -1/2" off that post. As you can see, it's not a lot to remove

Sponsored