Installed a winch on my stock (plastic) Rubicon bumper - DIY writeup

[Jaxmax]

Lot of guys are figuring out how to use the plastic bumper with winches, I used a LOD winch plate that fits flush with front of frame horns seems real solid and powder coating was excellent, plus price was right at $149.00……Jack
Ps: Rotating the clutch handle to rear let’s you keep bumper top area intact on some basic frame winches.

Sponsored

 

[Jrhz06]

Lot of guys are figuring out how to use the plastic bumper with winches, I used a LOD winch plate that fits flush with front of frame horns seems real solid and powder coating was excellent, plus price was right at $149.00……Jack
Ps: Rotating the clutch handle to rear let’s you keep bumper top area intact on some basic frame winches.

Which winch is that and which LOD winch plate? Best install I’ve seen and I’d like to do the same. I’m guessing 0701 plate and rc9.0 winch. What did you use to support the hawse fair lead, lod mount?Thanks

 

[Jaxmax]

I'll PM you and keep off this thread...but yes LOD plate, expensive very light winch, and 1/4" steel plate across frame horns then some large flat washers to space it out exactly. Pix coming your way

 

[shyoung1]

Jaxmax,
That is one clean install! That winch really solves the problem most have where the wires come out the back.
If convenient, could you PM me those pics as well?
Thanks

 

[krweatherl]

I just completed mine, also used the LOD winch plate (purchased used $40) and the Badlands Apex 12k winch.

 

[Crossfire190]

I just completed mine, also used the LOD winch plate (purchased used $40) and the Badlands Apex 12k winch.

What did you use to attach the fairlead ?

 

[krweatherl]

What did you use to attach the fairlead ?

I just used an inexpensive fair lead mount from Harbor Freight

https://www.harborfreight.com/winch-fairlead-mount-58019.html
I originally had to use a spacer between the fairlead mount and the bumper, didn’t care for that so I carefully cut the plastic around the fairlead so it could inset into the plastic.

 

[Crossfire190]

I just used an inexpensive fair lead mount from Harbor Freight

https://www.harborfreight.com/winch-fairlead-mount-58019.html
I originally had to use a spacer between the fairlead mount and the bumper, didn’t care for that so I carefully cut the plastic around the fairlead so it could inset into the plastic.

Perfect. Thank you!

 

[Quail 01]

Lot of guys are figuring out how to use the plastic bumper with winches, I used a LOD winch plate that fits flush with front of frame horns seems real solid and powder coating was excellent, plus price was right at $149.00……Jack
Ps: Rotating the clutch handle to rear let’s you keep bumper top area intact on some basic frame winches.

Great set up! Would really love to see build pics of you have them. Thanks!!!

 

[Mav4x4Chris]

I liked this idea so much, I did it myself. Still another afternoon of work to do. Waiting on one more part. All the hard work is done.

 

[Ecamimo]

I just completed mine, also used the LOD winch plate (purchased used $40) and the Badlands Apex 12k winch.

Do you have details pictures of the process

 

[Quail 01]

I have a new in box LOD winch plate for sale. $40 (local) + shipping (not local).

 

[jav_eee]

I have a new in box LOD winch plate for sale. $40 (local) + shipping (not local).

still have it?

 

[Quail 01]

still have it?

Yes sir.

 

[jav_eee]

Yes sir.

I’ll PM you

Sponsored