Leveling Kit Installed - 1.5" Front, 0.5" Rear (Teraflex)

[GrubbyBaja]

Installed a winch/winch plate on my JTR back in May. The 60+ pounds dropped the nose approximately 1/2" which accentuated the rake, so I decided it was time to level it up a bit. Ended up going with the Teraflex 1.5" Spacer Leveling Kit and also decided to go ahead and install 1/2" spacers on the rear to maintain a little rake. Simple 3.5-hour solo job with 2 jack stands, a floor jack, and old fashion (non-electric) wrenches/rachets. Instructions state to loosen the control arm bolts, but I decided to not mess with those (and the associated retorquing) and didn't have any issues. Used a rachet strap to help get the track bar holes lined up as I had seen in a video - simplified that process. Now the 33" tires look too small

Sponsored

 

[SummertimeCarl]

Looks good!

I've got the 1.5" on the front too, nothing on rear so far. May add a 3/4" down the line.

I wish someone had made a 2" leveling kit but they're all 1.5" or 2.5". A 2" on the front and a 0.75" on the rear would have been the PERFECT lift for my needs.