Sponsored

Teraflex 1.5" leveling kit to combat winch droop

RalphTuttle

Well-Known Member
First Name
Ralph
Joined
Jan 4, 2021
Threads
3
Messages
128
Reaction score
335
Location
North Carolina
Vehicle(s)
2021 Gladiator Mojave
Occupation
Engineer
Not yet, but what part won't work with the Mojave? At stock height there's no need for the shock extensions which I would think be the Mojave specific piece.
I agree.... Hence my confusion. I talked to someone over at 4 Wheel Parts and they said the kit should work fine. I actually just sent a note to Teraflex and asked them... If anyone should know definitively, it will be them!
Sponsored

 

RalphTuttle

Well-Known Member
First Name
Ralph
Joined
Jan 4, 2021
Threads
3
Messages
128
Reaction score
335
Location
North Carolina
Vehicle(s)
2021 Gladiator Mojave
Occupation
Engineer
Not yet, but what part won't work with the Mojave? At stock height there's no need for the shock extensions which I would think be the Mojave specific piece.
The response I received from Teraflex when I asked about their spacers working with the Mojave:

Thanks for reaching out! Yes, our spring spacers work with the Mohave. Anything under 2 inches and you won't need shock extensions.
 
OP
OP

dfwxjer

Well-Known Member
First Name
Dave
Joined
May 19, 2021
Threads
8
Messages
238
Reaction score
425
Location
DFW
Vehicle(s)
2 dr JKRX, Navigator L, 63 Impala SS, Lexus CT200h
Glad to hear and thank you for the confirmation! I didn't think there was any difference in the spring perch
 

Sarge502

Well-Known Member
Joined
Jul 3, 2021
Threads
46
Messages
1,310
Reaction score
2,478
Location
Kentucky
Vehicle(s)
2020 Jeep Gladiator Overland
Build Thread
Link
Occupation
Thin Blue Line
Vehicle Showcase
1
Not the best angle with the top pic, but that’s before the 1.5” teraflex spacer.

Bottom pic is with the front 1.5” spacer and 3/4“ rear spacer. Perfect amount of rake if you tow occasionally, which I will.

FC91D84D-172E-441C-A72D-DAB3D4FF3662.jpeg
Looks like you finally got the Rubi take offs added. How was the install. Mine went smooth.
 

NewGladdyOWNR

Well-Known Member
First Name
Johnny
Joined
Aug 7, 2021
Threads
28
Messages
480
Reaction score
778
Location
Michigan
Vehicle(s)
2024 Jeep Gladiator Rubicon
Occupation
MRI Technologist
Looks like you finally got the Rubi take offs added. How was the install. Mine went smooth.
Yup! It went moderately smooth. I had an issue with my driver said LCA lining up into the bracket. I had to use a ratchet strap to pull the axle forward to get it to line up. Rear suspension was a breeze.

I used some shock extension brackets in the front to compensate for the lift, but noticed that the sleeve on the shock was higher than the normal shock without the front spacer. So i removed the shock extension bracket, now the sleeve is an inch lower than where the sleeve would normally sit. (hope this makes sense). Long story short i probably could've kept the extension brackets on. Now my ride feels slightly rougher without them.
Sponsored

 
 







Top