What did you do WITH your Gladiator today?

[Chaimstein]

Pretty sure this is a first for a JT load......
Coaled fired, live steam 1.5” scale ride on steam locomotive.
Has jeep traits.....4 wheel drive, solid axles, coil spring suspension, full time lockers front and rear. Probably about 700 lbs in the truck. Rode sweet. Pulling my little teardrop trailer at the same time.

Oh man that so cool. They run those in my local park. I should go talk to those guys. Steam is cool.

Sponsored

 

[Ted Striker]

Don't know if this is what I did to my Gladiator today or with my Gladiator today since it's probably both LOL. I installed the new Smittybilt XRC Gen 3 winch and then took it down to the lake and pre-tensioned the synthetic winch line. It also gave me the chance to show the wife how to operate a winch. So far, I'm loving this winch. Plenty of power to pull but the features are what really sold me. The remote is magnetized so you can just stick it to the bumper while you're getting things set up. The remote also has a built in LED flashlight and lights that indicate when you're getting close to or have overloaded the motor. The winch also has an accessory power connector built in if you want to run something else off of it, an LED light over the spool so you can see the line at night and the XRC daytime running light is a nice touch.

 

[WhiteJT8541]

Mounted my jack, shovel, ax and front panel from @BuiltRight . Also realized that the Access Literider bed cover does not work with the @BuiltRight bed panels so looks like I’m back to the drawing board. Can anyone with the panels confirm that the Tyger/ Maxmate for the Colorado can be used?

 

[Sespe]

I needed a coat hook on short notice

 

[TheSolarWizard]

Don't know if this is what I did to my Gladiator today or with my Gladiator today since it's probably both LOL. I installed the new Smittybilt XRC Gen 3 winch and then took it down to the lake and pre-tensioned the synthetic winch line. It also gave me the chance to show the wife how to operate a winch. So far, I'm loving this winch. Plenty of power to pull but the features are what really sold me. The remote is magnetized so you can just stick it to the bumper while you're getting things set up. The remote also has a built in LED flashlight and lights that indicate when you're getting close to or have overloaded the motor. The winch also has an accessory power connector built in if you want to run something else off of it, an LED light over the spool so you can see the line at night and the XRC daytime running light is a nice touch.

I was musing around with my nearly 20 year old 9500HSi warn winch today and I started buzzing and quit. My have finally poop,d the bed... sounds like you’re really stoked. I’m gonna have a hard time justifying a new $1200 warn over this one.

 

[steffen707]

Mounted my jack, shovel, ax and front panel from @BuiltRight . Also realized that the Access Literider bed cover does not work with the @BuiltRight bed panels so looks like I’m back to the drawing board. Can anyone with the panels confirm that the Tyger/ Maxmate for the Colorado can be used?

FRONT RACK? WHERE'S MY FRONT RACK!

 

[steffen707]

Mounted my jack, shovel, ax and front panel from @BuiltRight . Also realized that the Access Literider bed cover does not work with the @BuiltRight bed panels so looks like I’m back to the drawing board. Can anyone with the panels confirm that the Tyger/ Maxmate for the Colorado can be used?

This is the one I have.
https://www.amazon.com/gp/product/B01M1K4T40/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Others reported you can get the mounts crambed into the corners and it'll still work. I didn't want mine to be there, so I made it work with some little aluminum tabs for the rails.

BuiltRight Industries Bedside Racks - Any Interest?

 

[MACulberson]

Today’s mod is the Mopar Grille/Winch Guard.

Coming soon, KC Daylighters and a Warn Winch. My Wench (her words) is offended that I’m getting a winch.

 

[WhiteJT8541]

FRONT RACK? WHERE'S MY FRONT RACK!

He had enough of your tomfoolery with your make shift rail system. Also could be the fact the Packers lost to a far less talented team last night.

 

[WhiteJT8541]

This is the one I have.
https://www.amazon.com/gp/product/B01M1K4T40/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Others reported you can get the mounts crambed into the corners and it'll still work. I didn't want mine to be there, so I made it work with some little aluminum tabs for the rails.

BuiltRight Industries Bedside Racks - Any Interest?

Problem is you can’t use it with the @JcrOffroad rack.

 

[steffen707]

He had enough of your tomfoolery with your make shift rail system. Also could be the fact the Packers lost to a far less talented team last night.

Low blow brother, but factual. At least Adams got me 24 points before stubbing his toe.

 

[Tom in Long Island NY]

In the mean while @JP1 we can move on to go rhino

sweet

 

[JP1]

sweet

wanna really talk sweet?
They make that thing with an option to fold the lights...

 

[Dr Kel]

Not all those who wander are lost.

 

[Tom in Long Island NY]

wanna really talk sweet?
They make that thing with an option to fold the lights...

Well they better get on it for the Gladiator! like soon..

Sponsored