What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS]

[Chuck]

Well picked up my 23 JTR Tuesday at Gupton, so far did:
Quadratec Rubicon wheels w/ Mickey Thompson Baja Boss ATs 35x12.5 17 (special thanks to @Discount Tire for the assistance on these tires)

Distinction applied painted grill insert, hood vents and wiper cowl

Weathertech headlight protectant film

Mopar wipers

de-badged except tailgate stupid placement holes so I painted the grey part black

installed my overland bound badges in place of the trail rated badge and antenna mount due to the pressing in the fenders

installed seat jackers. I love them.

then for the grand finally I pulled out the entire dash got the air bag removed went to install it in my leather dash………and it’s a RHD passenger panel I had never really looked at it the drivers side is the correct LHD but passenger side in incorrect so I put it all back together

Looks great man! Sucks about the dash panel tho

Sponsored

 

[OffAxis2021]

Got its first free oil change service done at 5,026 miles and finally got the speedometer recalibrated dealership properly.

I had a Tazer Lite for the most of those miles, but really do not care to put it back in. I found it to not be overly useful for me and did not bother to have the Jeep specialty shop install the AEV ProCal Snap either, when lifted.

Does anyone want to buy either of those?!? IDK.

¯\_(❛︣ ͜ʖ ❛᷅)_/¯

 

[RudeJeepin]

Got its first free oil change service done at 5,026 miles and finally got the speedometer recalibrated dealership properly.

I had a Tazer Lite for the most of those miles, but really do not care to put it back in. I found it to not be overly useful for me and did not bother to have the Jeep specialty shop install the AEV ProCal Snap either, when lifted.

Does anyone want to buy either of those?!? IDK.

¯\_(❛︣ ͜ʖ ❛᷅)_/¯

Nice looking ride.
Could you tell me what sliders and mudflaps you have? And what do you think about them?
Thanks.

 

[Minty JL]

Follow up

 

[OffAxis2021]

Nice looking ride.
Could you tell me what sliders and mudflaps you have? And what do you think about them?
Thanks.

Thank you and yes…

White Knuckle Offroad rock sliders with full top plates and they are Line-X’d. Big fan of them. Had them on a previous Toyota 4Runner TRD Pro and would have chosen them for a prior Tundra, but decided on All-Pro Offroad, before realizing I would have. They are frame mounted and can be for with or without Rubicon Rails. Without does not hide the pinch seam and additional clearance is slight. However… I am not a rock crawler, but only a sandy trail cruiser and they are some seriously badass/excessive even “side steps.” Hah!

Rockblokz mud flaps. I opted for size ORIGINAL front and rear. I think they look fantastically proportionate and do their job great. The top plates of the sliders pick up the “slack,” which was the plan. Pictures below are from a freshly chloride applied dirt road (literally pulled over for the tanker truck) and bone stock Mojave tires/wheels, lift, etc.

If I had to put some numbers to the setup… The Rockblokz protect from about 95% of a muddy dirt road and the sliders get the other 5%.

I could not be more happy with said setup and would not do anything any different.

 

[azmojave]

Putting together a dual flag setup for a Veterans Day event in a couple weeks. A friend of mine makes the hitch mounts, and I got the pipe from Home Depot. I’ll post again when it’s done. Needs hardware, paint and flags. (U.S. and Army)

 

[Gator McKlusky]

This weekend the RR full width front bumper, Apex Badland winch, Oracle fog lights, and D hooks. I’m covered front and back now.

 

[BlueScapegoat]

Putting together a dual flag setup for a Veterans Day event in a couple weeks. A friend of mine makes the hitch mounts, and I got the pipe from Home Depot. I’ll post again when it’s done. Needs hardware, paint and flags. (U.S. and Army)

I had to double take there, I was getting some mad bosozoku vibes

 

[OffAxis2021]

I just realized my above post belongs in the “What did you do FOR your Gladiator today?” thread! Doh!!

 

[CDNGladiator]

Follow up

Are those the Baja Design?

 

[Gvsukids]

Washed it, but not completely.

 

[Minty JL]

Are those the Baja Design?

No, Diode Dymanics SSD3 Max in amber

 

[Blue Ridge]

Because of watching videos like that, I installed a front camera on lunch break. Install was pretty easy other than getting the two 10mm bolts back in the grab handle.

 

[acyuncw]

I got a set of Amazon recovery boards (Bunker) for my birthday. A quick trip to Tractor Supply for some M6 x 100 ss bolts and a couple of tarp hooks and a shot of black spray paint did the trick. For the OCD impaired, I know it's off center (I hate it too but we're traveling tomorrow) but until I have a good think on some better hangars, it is what it is...

 

[Puch]

Put some new wheels on the JT. Added a little color to them a while ago. Just got around to installing them.

Sponsored