What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Klicht87]

Upgraded the halogen to LED

Which bulbs did you decide to go with?

Sponsored

 

[Jerhemi]

A friend of mine gave me some lights he wasn’t using, so I ordered some mounts and bolted them up. They work great on the Mojave. No extra hardware needed. I had to unbolt the top two bolts and then the two side bolts to make a gap for the wires to fit through (plastic plug on wires). I’ll get them wired up tomorrow.
Mounts-
KMFCDAE Cowl Light Mount for Jeep JL A-Pillar Cube Light Pods Mounting Bracket for Jeep JL Wrangler / Gladiator JT 2018 2019 2020 2021 2022 - Pair
https://a.co/d/58qkdTl

I was just looking at these brackets. I like that they are aluminum. Looks good!

 

[Jason Oliver]

Installed some KC Flex Era 4 lights with amber lenses on the bumper.

Unique headlights - which are those?

 

[trilifter7]

Bought my Gladiator a week ago today. I messed with the toe alignment for a week before final getting it dialed in over the weekend. I installed little stuff all week like grab handles and entry guards, visor brackets and a NOCO 2D internal mounted battery charger with the plug in socket mounted behind the bumper, Rok Bloks mud flaps and Terra flex bed rails. Finally last night I was able to get some wiring done and got the Aux switch panel wired in and my DD SS3 amber lights with DRL ambers wired in. Really loving this thing so far. It’s as fun to drive as my wife’s MT Bronco!

 

[BLK HOLE]

It’s a mock-up.

It will actually mount it to the tent tracks.

 

[mx5red]

Unique headlights - which are those?

I believe those are KC as well.

 

[Mister Lamb]

Slammed my seat with Desert Does It's kit. Dropped it the full 2" and I finally fit. Can't believe it took me this long to do. Must have mod for anyone 6'3 or taller

 

[Rusty PW]

Got my Rugged Ridge hood locks installed today. Didn't take long to do.

 

[OffAxis2021]

Dropped off Sunday evening/Picked up yesterday… “TO/FOR?!?” IDK

Since picking up an ordered by me Mojave at the end of May and putting on its current 6K miles (first Jeep), I finally got it ceramic coated. Opti-Coat Pro Plus (2 layer-7 year warranty) and had everything else underneath done with rust protection fluid film. Michigan Winters - PfFt!

I sure do like this Jeep a lot! A LOT!!

Yes, I have ORV/ORV Trail permits and a State Park pass.

??ShinyAF??
WinterWheels

 

[Duece McCracken]

I did a terrible job parking, for this terrible picture. Saratoga NY, modded Mojave. I had to, lol

 

[Rusty PW]

Installed a block heater in my diesel today. Simple job uh. Unscrew the block plug and screw in the block heater. Figure 45 minutes tops. Ehh 2 hrs later. I'm done. Got the old plug out with no problems. Start to thread the new block heater in. Didn't feel right. Took it back out and found the first 2 threads started the cross thread. Chased the threads and cleaned them up with a file. Put it back in and it seated. Ran the power cord from the bumper back along the frame. Found hooks on the back of the bumper and on the frame for the power cord.

Would like the thank @BlueScapegoat for the thread. ?

https://www.jeepgladiatorforum.com/forum/threads/ecodiesel-block-heater-installation.63131/

 

[SF_E60]

Put amber lenses on the rock lights

Are those KC Flex Era 4 lights?

 

[ospreyfe55]

Bought my Gladiator a week ago today. I messed with the toe alignment for a week before final getting it dialed in over the weekend. I installed little stuff all week like grab handles and entry guards, visor brackets and a NOCO 2D internal mounted battery charger with the plug in socket mounted behind the bumper, Rok Bloks mud flaps and Terra flex bed rails. Finally last night I was able to get some wiring done and got the Aux switch panel wired in and my DD SS3 amber lights with DRL ambers wired in. Really loving this thing so far. It’s as fun to drive as my wife’s MT Bronco!

So not really Jeep related but what brand is that flag pole you have in the background? My wife and I want to get one for the new house, figured I’d ask! Beautiful rigs by the way!

 

[ospreyfe55]

It isn't quite done and I didn't do it all today but I'm making glacial progress on my new bed cover set up. Stoll not sure I even like it but it was ~1/3 of diamond back. Please forgive the mess znd crap, I haven't vacumed it out

What tool box is that? I was given a box but I have to do a little cutting and welding to clear the fuel filler area inside the bed to even it up on both sides.

 

[jeepers29]

Bought my Gladiator a week ago today. I messed with the toe alignment for a week before final getting it dialed in over the weekend. I installed little stuff all week like grab handles and entry guards, visor brackets and a NOCO 2D internal mounted battery charger with the plug in socket mounted behind the bumper, Rok Bloks mud flaps and Terra flex bed rails. Finally last night I was able to get some wiring done and got the Aux switch panel wired in and my DD SS3 amber lights with DRL ambers wired in. Really loving this thing so far. It’s as fun to drive as my wife’s MT Bronco!

Link to battery charger? Love the rig

Sponsored