What did you do WITH your Gladiator today?

[HikerBob]

After hauling the Gladiator storage with my Gladiator I finally got around to finishing the cabinets and workbench. Next is paint. I know, I know. I should’ve painted first but I couldn’t wait to get the system put together.

Sponsored

 

[Sespe]

Went to the beach...

 

[Oscar Indy]

Rescued a Duramax from a ditch this morning.
Apparently, 2 tow trucks had already failed to get him out.

 

[Wilsonb80]

Added the grocery stopper... she got tired of being sent in under the cover for the escaped cans.. although she has improved her low craw skills..

 

[Gatorized]

Added the grocery stopper... she got tired of being sent in under the cover for the escaped cans.. although she has improved her low craw skills..

You need a 1” chamfer on the bottom corners so it sits flush.

 

[WhatExit?]

Explored Death Valley with friends for 2 ½ days (4 day trip) - 4-wheeling exploration and camping (aka "overlanding")

The adventure is here: https://www.jeepgladiatorforum.com/...ley-2020-a-gladiators-exploration-trip.28088/

 

[RBillybob]

Went to the range to ring some steel

 

[19JL]

Finished up this little project, needed a place for my inverter, twin arb, fridge plug, aux switches, and switch pod. i think it turned out pretty sweet! I ran a 100amp fused 4ga quick disconnect plug to the bed and then fused each circuit from there. I’m now able to run a grinder, drill, and espresso marker on the trails best thing is it removes in a matter of 2-3 minutes.

 

[JonRJackson]

Wasnt today, but this past weekend. Took it out on the trails in Arkansas!

 

[Whiplash2130]

Finished up this little project, needed a place for my inverter, twin arb, fridge plug, aux switches, and switch pod. i think it turned out pretty sweet! I ran a 100amp fused 4ga quick disconnect plug to the bed and then fused each circuit from there. I’m now able to run a grinder, drill, and espresso marker on the trails best thing is it removes in a matter of 2-3 minutes.

Are you powering a 1000w inverter strictly off the production battery setup? Do you use or plan to use a battery monitor system to ensure you don’t dump the batteries to a level you can’t start?

 

[PyrPatriot]

Prepared to test out a new car wash

 

[19JL]

Are you powering a 1000w inverter strictly off the production battery setup? Do you use or plan to use a battery monitor system to ensure you don’t dump the batteries to a level you can’t start?

Yes and it has a monitoring system built in. If I use the inverter it will be while the engine is running. Been using this setup for years without any issues. Also I have the larger alternator. I will probably install a second battery in the bed but no plans as of yet.

 

[robertm55]

Yes and it has a monitoring system built in. If I use the inverter it will be while the engine is running. Been using this setup for years without any issues. Also I have the larger alternator. I will probably install a second battery in the bed but no plans as of yet.

Looks awesome!
Really nice job. Having the ability to run power tools is awesome.
Well done!

 

[19JL]

Looks awesome!
Really nice job. Having the ability to run power tools is awesome.
Well done!

Thank you. It was a fun project.

 

[eaglerugby04]

Prepared to test out a new car wash

That is impressive. you have to leave it like that for at least a few days

Sponsored