Sponsored

Teraflex 1.5 Inch Front Leveling Kit

Steelers11

Well-Known Member
Joined
Oct 30, 2018
Threads
12
Messages
83
Reaction score
70
Location
Southern Indiana
Vehicle(s)
2021 JT Overland
I put 1.5 teraflex on mine. On pavement 90% of the time. Extensions aren't so much needed really. Looks a lot better. Handles a bit different but not that drastic of a change

B6F85539-D7DB-41A5-B284-FF66AEE41B47.jpeg


1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5.jpeg
Sponsored

 

Steelers11

Well-Known Member
Joined
Oct 30, 2018
Threads
12
Messages
83
Reaction score
70
Location
Southern Indiana
Vehicle(s)
2021 JT Overland
I put 1.5 teraflex on mine. On pavement 90% of the time. Extensions aren't so much needed really. Looks a lot better. Handles a bit different but not that drastic of a change

Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5


Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5
Sorry forgot to mention the first photo is before. Second is with the leveling kit
 

Rubiman

Well-Known Member
Joined
Feb 10, 2021
Threads
26
Messages
212
Reaction score
53
Location
The moon
Vehicle(s)
Gladiator Rubicon
So you are saying 1.5 would have made it level?
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5

I installed the 1" spacer only on mine this weekend. Measured to the rock rail from the ground and it's 18 1/2" in the front and 19" in the back after install. I have the factory steel bumper with mopar 7" lights, Light bar, and 9500lb winch. Sitting on 35x12.50 ridge grapplers. For reference for anybody who is thinking of doing this. I also have airbags installed in the rear but no air in them (actually 5lbs) in this pic and for the measurements. Truck sitting on a hill in this pic in front of my office so it's hard tell the rake but it's there.
 

Browning

Well-Known Member
First Name
Todd
Joined
Jun 23, 2020
Threads
7
Messages
112
Reaction score
242
Location
Georgia
Vehicle(s)
2020 JT Rubicon
Occupation
State Farm Agent
looks like it.
 

Sponsored

CajunJeep

New Member
Joined
Jan 27, 2021
Threads
0
Messages
2
Reaction score
3
Location
Louisiana
Vehicle(s)
2021 Gladiator High Altitude
Is it 100% necessary to have an alignment performed after installing the 1.5" Teraflex leveling kit? I installed mine and there is now wandering or pulling in either direction. The steering wheel is perfectly centered as well after installing.
 

DocMike

Well-Known Member
First Name
Mike
Joined
May 28, 2020
Threads
57
Messages
2,555
Reaction score
4,747
Location
Colorado Springs
Vehicle(s)
2020 Gladiator Sport S, 2001 Audi TT Roadster, 1930 Model A Hot Rod, 1973 VW Square Back
Occupation
Education
Looking at adding this to my Sport S running 33s.. I have rubicon springs going on (once the shop lift is functioning) and the fox shocks plus a jks quick disconnect.
Just added a steel bumper. Thought the 1.5in Teraflex would help up front. Anyone wheel this?
Do you lose any downward travel? Planning on Ouray and Engineer pass this summer.
 

troopertrek

Well-Known Member
First Name
Nate
Joined
Jul 10, 2021
Threads
1
Messages
52
Reaction score
68
Location
United States
Vehicle(s)
21 JTR; 20 VW Tiguan SEL R-Line; 06 Mustang GT
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5

I installed the 1" spacer only on mine this weekend. Measured to the rock rail from the ground and it's 18 1/2" in the front and 19" in the back after install. I have the factory steel bumper with mopar 7" lights, Light bar, and 9500lb winch. Sitting on 35x12.50 ridge grapplers. For reference for anybody who is thinking of doing this. I also have airbags installed in the rear but no air in them (actually 5lbs) in this pic and for the measurements. Truck sitting on a hill in this pic in front of my office so it's hard tell the rake but it's there.
Do you know or can you identify which front coil spring part numbers were installed on your JTR? Mine is equipped the same minus the steel bumper & winch. My springs are 6362AA/6363AA (DS/PS). I'm going for this look & plan on installing the mopar steel bumper & perhaps the winch. I want to retain about 1" rake, so if your springs are the same I'd probably opt for the .75" front spacers.

Looks Good BTW.
 

jhunter

Active Member
First Name
Jeff
Joined
May 13, 2019
Threads
1
Messages
31
Reaction score
34
Location
Canal Winchester OH
Vehicle(s)
2020 Jeep Gladiator JT Overland White
Is it 100% necessary to have an alignment performed after installing the 1.5" Teraflex leveling kit? I installed mine and there is now wandering or pulling in either direction. The steering wheel is perfectly centered as well after installing.
I would say yes. I put 1.5” on front and .75” on back. Same thing— just a bit of pulling. Dealer aligned it. All good.
 

Sponsored

paulsoncall

Member
First Name
Paul
Joined
Jul 7, 2021
Threads
1
Messages
16
Reaction score
23
Location
Rhode Island
Vehicle(s)
Gladiator Overland
I put 1.5 teraflex on mine. On pavement 90% of the time. Extensions aren't so much needed really. Looks a lot better. Handles a bit different but not that drastic of a change

Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5


Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1C3426E8-AA98-46A4-8ECD-CB1FFDCF69D5
Is this just the 1.5” on the front? No spacers on rear? I’m thinking of doing the same.
 

skerb

Well-Known Member
First Name
Brooks
Joined
Jul 28, 2021
Threads
3
Messages
62
Reaction score
49
Location
South Carolina
Vehicle(s)
97 TJ6, 21 JTURD
Occupation
Civil Engineer
teraflex 1.5 spacers in the front, no other changes to suspension. haven't taken any pics of it on flat ground yet.

Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1634918556447


Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1634918573306
 

Daddiator54

Well-Known Member
Joined
Sep 18, 2021
Threads
5
Messages
119
Reaction score
175
Location
US
Vehicle(s)
Gladiator Freedom
Occupation
Systems Engineer
Vehicle Showcase
1
Could you get away with not doing an alignment if you didn’t undo the trackbar and instead just used spring compressors when installing the teraflex 1.5” kit? Seen some people as well as videos mention it but just wanted to confirm.
 

NewGladdyOWNR

Well-Known Member
First Name
Johnny
Joined
Aug 7, 2021
Threads
22
Messages
363
Reaction score
523
Location
Michigan
Vehicle(s)
Jeep Gladiator Overland
Occupation
MRI Technologist
Could you get away with not doing an alignment if you didn’t undo the trackbar and instead just used spring compressors when installing the teraflex 1.5” kit? Seen some people as well as videos mention it but just wanted to confirm.
I didn’t need an alignment after my suspension swap, new LCA’s and leveling kit. I took it to belle tire and told them what I did to my JT and they acted like it would definitely need one, but the specs came back pretty much spot on, so I saved $90
 

Laudra

Active Member
First Name
Lee
Joined
Jul 21, 2019
Threads
7
Messages
26
Reaction score
25
Location
Worcester
Vehicle(s)
2020 Jeep Gladiator JT Rubicon
Occupation
Nurse
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1634918573306

I installed the 1" spacer only on mine this weekend. Measured to the rock rail from the ground and it's 18 1/2" in the front and 19" in the back after install. I have the factory steel bumper with mopar 7" lights, Light bar, and 9500lb winch. Sitting on 35x12.50 ridge grapplers. For reference for anybody who is thinking of doing this. I also have airbags installed in the rear but no air in them (actually 5lbs) in this pic and for the measurements. Truck sitting on a hill in this pic in front of my office so it's hard tell the rake but it's there.
Thise 12.5" wide tires fit the factory wheels without rubbing?
Sponsored

 
 



Top