What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[kingern]

Installed Weathertech front and rear mud flaps.

Sponsored

 

[jeepers29]

I added a rubi steel rear bumper and sliders to the Mojave. I put on the oracle back up lights as well while I had the bumper tore off.

 

[kad's_Glad]

I added a rubi steel rear bumper and sliders to the Mojave. I put on the oracle back up lights as well while I had the bumper tore off.

Looks like you have the ParkSense sensors in the bumper. Did the steel bumper come with the holes for them? If so, do you have the part number? Also, did you just move the sensors, holders, etc., over from the stock bumper? Benny at AllMoparParts.com said it would be pricey for all the little bits and bobs as there was no Mopar conversation kit available. Just hoping I only need the bump to change mine over.

Sorry for all the questions

 

[Hootbro]

Installed a passenger side hook on my Willys. A bit of advice to anybody doing the same on a non Rubicon plastic bumper and installing a OEM bezel for the cutout, you will spend 95% of your time trying to figure out how to separate the two plastic cover halves trying to get the bezel insert swapped. Get comfortable with possibly breaking a tab or two if not careful.

 

[b-roc]

Looks like you have the ParkSense sensors in the bumper. Did the steel bumper come with the holes for them? If so, do you have the part number? Also, did you just move the sensors, holders, etc., over from the stock bumper? Benny at AllMoparParts.com said it would be pricey for all the little bits and bobs as there was no Mopar conversation kit available. Just hoping I only need the bump to change mine over.

Sorry for all the questions

The cost for the parksense brackets wasn't horrible when I did mine. First, when I did mine, you couldn't get a steel rear bumper with park sense holes unless it was a take-off ... I don't know if this has changed. The brackets for the steel and plastic bumpers were different and a couple of additional bolts were required. The total cost for all of this was approx $70 from all mopar parts a little over a year ago ...

Part Number​	Part Name​	Price​	Quantity​	Total​
68341888AA​	Sensor Mounting Bracket​	$3.42​	1​	$3.42​
68341889AA​	Sensor Mounting Bracket​	$3.42​	1​	$3.42​
68341892AA​	Sensor Mounting Bracket​	$3.42​	1​	$3.42​
68341893AA​	Sensor Mounting Bracket​	$3.42​	1​	$3.42​
6UD40RXFAA​	Park Distance Bezel​	$3.42​	1​	$3.42​
6UD41RXFAA​	Park Distance Bezel​	$3.42​	1​	$3.42​
6UD42RXFAA​	Park Distance Bezel​	$3.42​	1​	$3.42​
6UD43RXFAA​	Park Distance Bezel​	$3.42​	1​	$3.42​
68271824AA​	Decoupler Ring​	$1.08​	4​	$4.32​
6512896AA​	Screw And Washer​	$2.62​	2​	$5.24​
6511076AA​	Mopar Rivnut​	$2.12​	2​	$4.24​
6104727AA​	Nut, Mounting​	$3.76​	4​	$15.04​
6104418AA​	Hex Head Bolt And Washer, Mounting​	$2.28​	2​	$4.56​

Subtotal: $60.76​

 

[JTBurns]

Added this cool air freshener I got as part of an Etsy gift:

 

[Gren71]

Installed a passenger side hook on my Willys. A bit of advice to anybody doing the same on a non Rubicon plastic bumper and installing a OEM bezel for the cutout, you will spend 95% of your time trying to figure out how to separate the two plastic cover halves trying to get the bezel insert swapped. Get comfortable with possibly breaking a tab or two if not careful.

I may be messaging you for advice once it warms up. The parts for this are in the heap in my garage

 

[polarisTXguy]

Never again on Jack stands! I will install a 2 post lift on the farm.

So I finally got around to installing my Clayton lift on the JT this past weekend and I think it looks great.

JT now stands 79 5/8 inches tall and 49 inches to the top of the fenders & 59 to the top of the bed rails.

Ps….. I don’t care about MPG! I just fill up when on empty ?

Clayton Offroad 2.5 Overland Plus
APEX Performance sway bar disconnects
Eaton eLocker (front)
Spicer 5:13 Gears
G2 Diff Covers front and rear
Skid plate mash up part Hawk & Rubicon Express
ICON Bumper
Smittybuilt 12k winch
Ridged Fogs
Falcon Steering stabilizer
ARB single under the driver fender
Tom Woods drive shafts on order
37x12.5x17 BFG KM3
ICON rims

King Shocks on order
39 KM3 + Method 108 Bead locks on order to replace the current set up

 

[KX L]

Braved the cold and put on the tonneau and installed the Diono car seats so the wife can take it grocery shopping.

I love being old and not having to deal with this crap. For the grandkids it's so much easier to use their car already set up with the seats.

 

[KX L]

Well it was a long weekend on Jack stands in a way to small garage. Lift is finally installed. Needs an alignment now

59 inches to the top of the bed and 49 top of the fenders.

View attachment 220779

Love the tailgate lettering. From outside the Jeep looks too tall for the garage---assuming it's just the angle. Does it fit in the garage?

 

[Artsifrtsi]

Installed a JK Hardrock front bumper…. Deleted the crush cans and covers, and installed d-ring mount plates instead.

 

[BeachBuggy]

Installed weather tech mats in the front and back.

Last week got a dead pedal and Fox steering stabilizer done.

 

[Boostnu]

Finally installed my rpm 2.5 ton steering kit along with clayton front track bar.

 

[jeepers29]

Looks like you have the ParkSense sensors in the bumper. Did the steel bumper come with the holes for them? If so, do you have the part number? Also, did you just move the sensors, holders, etc., over from the stock bumper? Benny at AllMoparParts.com said it would be pricey for all the little bits and bobs as there was no Mopar conversation kit available. Just hoping I only need the bump to change mine over.

Sorry for all the questions

The member I bought the bumper from had ordered all the parts and shipped them to me. It cost $100 from Bam wholesale parts. I can email you a copy of the parts needed if you DM me your email. HIs parts list was perfect, no more needed and none left over. I did also install the bedside rubi rails so the bolts for those is on the list. If you don't need those it would you about $20. The bumper had the sensor holes but the bezels for the sensors and plate light do not swap from one bumper to the other, hence the parts list. The sensors where the only part I reused.

 

[Dougstdig]

bath time today.

Damn…what’s that antenna for???

?

Sponsored