Lets see all those Gladiators with lifts and bigger tires!

[trailless]

Here's mine.

• 4.5" EVO stage 4+ overland lift
• 37x12.5r17 Cooper STT Pro
• 17" KMC Grenade Beadlocks
• Front and Rear Adams 1350 driveshafts

Rides great. Got it up to 90mph and no issues with the tires at all.

Sponsored

 

[woowoh]

Did you do anything different on 2nd axle? Do you think RCVs would have prevented the catastrophe?

I have not yet, rcv’s I probably would’ve broke something inside the dif, maybe the knuckle, or nothing at all hard to know for sure, but either way wouodve been cheaper then replacing the whole axle.

 

[DocMcStuffins]

I have not yet, rcv’s I probably would’ve broke something inside the dif, maybe the knuckle, or nothing at all hard to know for sure, but either way wouodve been cheaper then replacing the whole axle.

Copy. I am doing RCVs, Reid knuckles, HD balljoints, trusses/gussets- but still worry about the tiny R&P lurking inside waiting to explode! ?

 

[Rusty PW]

Copy. I am doing RCVs, Reid knuckles, HD balljoints, trusses/gussets- but still worry about the tiny R&P lurking inside waiting to explode! ?

I put RCV axles and Dynatrac freespin hubs on my Power Wagon. I figure the hubs would be my fusible link that will break before anything else. It's easier and cheaper to replace a hub instead of anything else. I'm hoping Dynatrac will come out with a freespin kit for the JL/JT.

 

[TheSolarWizard]

Copy. I am doing RCVs, Reid knuckles, HD balljoints, trusses/gussets- but still worry about the tiny R&P lurking inside waiting to explode! ?

you’ll split the junction at the housing before you break the r& p unless you’re running a hellcat

 

[sizmtrz]

37x

37's with 2" leveling and sport fenders? Please elaborate on what 2" lift you use. Thank You. Trying to decide between this or just stripping the inner/lower fender for clearance. Thank You

 

[sizmtrz]

Dealer installed - Rough Country 3.5 spacer lift (I’ll be replacing with Mopar 2 “+ 1 “ spacer
37 BFG KO2’s
Black Rhino 17’ (York)

How did it ride with the 3.5 spacer compared to stock? thanks!

 

[Narpet]

Just took mine out for the first time with the new lift. Went to the local logging trails just to break it in a little. Basically just mud and some light rough terrain. I did crawl a small rock area for the fun of it. It performed beautifully. Pictures are from the end of our trip today, airing back up... and a quick undercarriage shot.

I gave it a 2.5 inch lift and added 37 inch tires. I kept my existing wheels for two reasons. First, I really like them and second, I'm on a budget and that was one place to save some money. It's perfect for my wife and I. I'm not going to re-gear right now, but maybe in the future.
Here's what I added:

Rubicon Express:

• Super ride front lower fixed control arms
• Heavy-duty forged adjustable front track bar
• Front coil springs
• Real coil springs
• Track bar bracket and sway bar links

Fox:

• Fox 2.0 performance shocks

RockJock:

• JL/JT Currectlync steering system

Bilstein:

• 5100 Series steering damper

Mickey Thompson:

• 37x12 Baja Boss M/T

Spidertrax:

• Offroad wheel spacers

 

[jmmorgan82]

3.5" Clayton Overland Plus Lift
38x13.5x17 Milestar Patagonias
Fuel D701 wheels with -12mm offset (4.53" BS)

 

[MNhunter1]

Finally getting some pictures up of the cleaned Mojave with 3.5" Teraflex lift and 37" KO2s. Rides perfectly, very little road noise...just need to get the running boards on for the kids. Now I need the soft top and we will be ready for summer!

Did you maintain the stock Mojave shocks with the 3.5" Teraflex lift?

 

[Rubi-Zero]

Did you maintain the stock Mojave shocks with the 3.5" Teraflex lift?

From those pics, Falcons are being used. It could be by choice.

 

[Jayson1578]

From those pics, Falcons are being used. It could be by choice.

Not the stock shocks. The stock suspension was removed for the lift. @Rubi-Zero is correct they are Falcons 3.1s.

 

[SeattleJeeper]

Hi

2020 Gladiator Rubicon
3.5 Metalcloak GC
37" patagonias
Still on stock gearing... its "not bad" but will be doing 4.88 or 5.13 soon

More things inbound, still waiting thanks to supply chain delays

rides great as my current DD, haven't taken it out too much yet

 

[NinaFox317]

WOW!!!! Unique, with a retro flair. Love the KC lightbar... very cool build!

Thank you! That was exactly the look I was going for! I have moved the fox down and finished the wrap on the rear fenders since taking this photo. Also, wrapping the KC light covers!!!

 

[ScottLars]

Mopar 2" lift
Pro Comp 69 series Wheels (17x9, -6mm offset)
37" BFG K02's

Did the TPMS work with these wheels?

Sponsored