AEV 2" spacer lift for Mojave Gladiator

[Clv22p]

Anyone actually installed a kit yet? I just stare at mine until I decide wheels and tires. Got the wheel decision made, but still can’t decide 315s, 35s, or 37s. I am not going to regear

Sponsored

 

[Panther69]

Anyone actually installed a kit yet? I just stare at mine until I decide wheels and tires. Got the wheel decision made, but still can’t decide 315s, 35s, or 37s. I am not going to regear

I’m still waiting on my Gladiator to come in!! I’m going to go with AEV spacer lift, geo brackets, black Salta XR, and 35 inch BFG KM3. Just need it delivered!! ??

 

[Mac]

When installing the AEV Mojave 2" Spacer Kit is there a need to also install F&R Adjustable Track Bars to keep things centered. May also keep my 1" Leveling block up front and .75 Leveling block in the rear.

You shouldn't need track bars but opinions vary on this, yes the axles will shift over but it is pretty minor and has no affect on handling or alignment. I doubt you will be able to stack your existing spacers on the AEV spacers.

 

[Wbee]

I’m doing a 2” Lift on my Mojave and just finished ordering all the part. I’ll be using a 2.5 inch tereflex spacer lift an only use the 2” pucks up front. I’ll lift the back by 1” using the pucks. I bough lower control arms and a new trackbar for the front. I also ordered Fabtech shock extensions. Looking forward to putting it all together. I have 35’s on it now but want to go to 37’s with 5.13 gears.

 

[PabstBleuRibbon]

Just ordered the 2" AEV lift and geometry brackets. Also going to move my 315/70 Ko2s to AEV Borahs. In the rear to level out under load going to put in some airbags. Some other items too but that's it for suspension

 

[Casey_the_Gladiator]

Just ordered the 2" AEV lift and geometry brackets. Also going to move my 315/70 Ko2s to AEV Borahs. In the rear to level out under load going to put in some airbags. Some other items too but that's it for suspension

NICE. Where were you able to pick all that up? AEV has been out of stock for some time, yes?

Can't wait to see the new rig!

 

[Clv22p]

NICE. Where were you able to pick all that up? AEV has been out of stock for some time, yes?

Can't wait to see the new rig!

I ordered mine from Rubitrux after AEV canceled my order from being out of stock.

 

[sandifer]

I ordered mine from Rubitrux after AEV canceled my order from being out of stock.

I called Rubitrux several days ago about the AEV Mojave lift and was told that they don't actually have it in stock? Have they got them in stock now?

 

[Clv22p]

I got mine a couple of weeks ago

 

[sandifer]

I got mine a couple of weeks ago

OK... thanks for letting me know....

 

[PabstBleuRibbon]

NICE. Where were you able to pick all that up? AEV has been out of stock for some time, yes?

Can't wait to see the new rig!

ah, I just ordered everything from Northridge 4x4, I guess it'll get here when it gets here. Got the shipping confirmation for the Boras though

 

[BBETTS1024]

I’m doing a 2” Lift on my Mojave and just finished ordering all the part. I’ll be using a 2.5 inch tereflex spacer lift an only use the 2” pucks up front. I’ll lift the back by 1” using the pucks. I bough lower control arms and a new trackbar for the front. I also ordered Fabtech shock extensions. Looking forward to putting it all together. I have 35’s on it now but want to go to 37’s with 5.13 gears.

I did the EXACT same with my Rubicon. Rides great. Used the TF Alpine front lowers and TF trackbar. Also installed shock relocation brackets (teraflex for front and evo on the rear) Rides great however the rear sits lower than I expected. I plan on getting a TF 1.5 rear spacer and bump stop ext from the 3.5 lift and use the .5 stack in the front I left off. Anyone have any experience with a rear trackbar relocation bracket?

 

[Wbee]

I did the EXACT same with my Rubicon. Rides great. Used the TF Alpine front lowers and TF trackbar. Also installed shock relocation brackets (teraflex for front and evo on the rear) Rides great however the rear sits lower than I expected. I plan on getting a TF 1.5 rear spacer and bump stop ext from the 3.5 lift and use the .5 stack in the front I left off. Anyone have any experience with a rear trackbar relocation bracket?

I called teraflex and ordered a 1.5 inch lift spacer for the rear springs in addition to the .5 spacer from the kit I bought. I think they were 50 dollars. I can go up 2.5” in the front and 2.0” in the rear. Are you going to add a carrier bearing drop to the drive shaft?

 

[BBETTS1024]

I called teraflex and ordered a 1.5 inch lift spacer for the rear springs in addition to the .5 spacer from the kit I bought. I think they were 50 dollars. I can go up 2.5” in the front and 2.0” in the rear. Are you going to add a carrier bearing drop to the drive shaft?

Same here. they were able to sell just the rear 1.5 spacer it was $59.98 also ordered the new rear track bar bracket they offer. I've considered adding a drive shaft carrier bearing I think I saw where AEV includes it in their lifts. Did you install one?

 

[Wbee]

Same here. they were able to sell just the rear 1.5 spacer it was $59.98 also ordered the new rear track bar bracket they offer. I've considered adding a drive shaft carrier bearing I think I saw where AEV includes it in their lifts. Did you install one?

I haven’t installed my lift yet, I was thinking about adding the carrier bearing drop and will probably add it at some point. I might just head down to Home Depot and build up my own drop bracket. I still need to find a rear trackbar bracket. I can’t get the tires I want from Nitto so I don’t want to add the lift until I can get tires.

Sponsored