Czajka90
Active Member
- First Name
- Corey
- Joined
- Apr 9, 2020
- Threads
- 1
- Messages
- 31
- Reaction score
- 34
- Location
- North carolina
- Vehicle(s)
- 2020 Jeep gladiator, 2016 wrangler, 1987 Comanche, 1949 CJ3A
- Occupation
- Firefighter
- Thread starter
- #1
So I’ve been doing some research on this nasty trickery that has played some of us. The lack on a button on the bed lights to turn them on. I found a picture of the bed light kit offered by Oracle and noticed that their Jeep gladiator had a button on the light. I also found that the 2019 Dodge Ram had buttons in the light too. Well attached are the pictures of the lights on Oracles Gladiator and you can slightly notice the top of the lights appears to have the RAM logo on them which you can also conspire to the Mopar bed light kit offered for the RAM, part number 82215272ab. I’ve also taken the liberty which I regret cause to take the light out of my gladiator and take pictures of the back side. Note, the lights are 3M taped to the bed, not clipped in. They will not stay in place if you take them out and put them back in. You will need to get new tap. The connections are the same as the RAMs. So for around $130 on Amazon, you can buy the kit and switch the lights, which have new 3M tape and ditch the harness that comes with it since you won’t be needing it. I am going to be ordering it shortly and will update.
View attachment 71805
View attachment 71806
View attachment 71807
View attachment 71808
View attachment 71809
View attachment 71810
View attachment 71805
View attachment 71806
View attachment 71807
View attachment 71808
View attachment 71809
View attachment 71810
Sponsored
Attachments
-
0 bytes Views: 0
-
0 bytes Views: 0
-
0 bytes Views: 0
-
0 bytes Views: 0
-
0 bytes Views: 0
-
0 bytes Views: 0