What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Dewyaw]

You can get almost any of the Mojave interior pieces. The below thread has all the part numbers and Benny at allmoparparts.com has great service and prices. I have replaced the dashpad, vents, both shifter boots, and the console lid.

https://www.jeepgladiatorforum.com/forum/threads/gladiator-mojave-part-numbers-list.34668/

Correct, I’ve used that list for the top dash pad, console lid and parking brake too, but last I checked there is still no front dash panel with Mojave orange

https://www.allmoparparts.com/catalogsearch/result/index/?p=1&q=dash+panels

Sponsored

 

[BLK HOLE]

Awesome…yeah, I think the torque specs for some of those bolts are over 100lbs/ft

Thats good to know, thanks for the response…

As high as 190...

 

[gerky18]

Correct, I’ve used that list for the top dash pad, console lid and parking brake too, but last I checked there is still no front dash panel with Mojave orange

https://www.allmoparparts.com/catalogsearch/result/index/?p=1&q=dash+panels

Awe, I see what you're looking for. I haven't seen that before and didn't even think of that as an option. That is definitely something I would be interested in too.

 

[Garemlin]

Bulletpoint Rubigrid replaced my RAM Mounts Tough Track.

Also reinstalled most of my aftermarket parts that I stripped off last week. My sale deal fell through so I'm keeping her. Guess it was meant to be.

 

[Beewdawg]

I’m in the exact same boat, have Wildpeaks, about to switch to Ridge Grapplers….what’s your take on them now?

I've been riding on them for 6 months (13k miles) now and I really like the solid feel under me on the paved roads and the mild trails I've been on so far. Nice and quiet too.

 

[USMC-SSGT]

One of these. Will do a short post on lessons learned etc so the next person can be better off than I was.

 

[Fouts]

Arcus bumper and warn winch installed.

 

[USMC-SSGT]

Arcus bumper and warn winch installed.

Nice, mine shows up tomorrow.

 

[RSK]

I’m in the exact same boat, have Wildpeaks, about to switch to Ridge Grapplers….what’s your take on them now?

I put 33” Nitto Grappler M/T’s on my wife’s Wrangler. They looked great new and still look pretty good, but only got around 20k miles out of them and her Jeep really started to handle poorly and wander as the tread wore down. They probably have another 5k miles on the tread, but she complains about the handling and I have to agree, they are not great. I wouldn’t buy Nitto M/T’s again.

I’m giving her my OEM 33” Falken M/T’s with 35k miles and still plenty of tread on them. Then upsizing my Gladiator to Falken AT3W 35”. I really like how the Falken’s handle and look. Hope these will be just as good as the ones on now.

Everything setup to be done within a week depending on the tire shipment being on time. I’ll post when finished.

 

[Willys2Gladiator]

Off topic, wrong forum, but here you go. 1964 CJ3B

So sweet. Miss my old 3B

 

[jsalbre]

I put 33” Nitto Grappler M/T’s on my wife’s Wrangler. They looked great new and still look pretty good, but only got around 20k miles out of them and her Jeep really started to handle poorly and wander as the tread wore down. They probably have another 5k miles on the tread, but she complains about the handling and I have to agree, they are not great. I wouldn’t buy Nitto M/T’s again.

I’m giving her my OEM 33” Falken M/T’s with 35k miles and still plenty of tread on them. Then upsizing my Gladiator to Falken AT3W 35”. I really like how the Falken’s handle and look. Hope these will be just as good as the ones on now.

Everything setup to be done within a week depending on the tire shipment being on time. I’ll post when finished.

I changed out my 33s to 35 AT3Ws at 500 miles and I’m at 8500 now. So far I’d say they’re the best tire I’ve ever run on a Jeep, and the wear on them is almost unnoticeable at this point.

 

[MyRight]

I installed my Hooke Road side steps today.
Pretty heavy duty...the package was just under 100lbs.

I'm pretty happy with them overall, but just wished they were a bit more contoured to the body, so they wouldn't be sticking out towards the back like they are...

 

[AZCooWhip]

Not a darn thing .....I have become such a slacker.

 

[Sarge502]

Bulletpoint Rubigrid replaced my RAM Mounts Tough Track.

Also reinstalled most of my aftermarket parts that I stripped off last week. My sale deal fell through so I'm keeping her. Guess it was meant to be.

Love my Rubigrid. Bulletpoint is an awesome company for sure.

 

[Garemlin]

Love my Rubigrid. Bulletpoint is an awesome company for sure.

It is rock solid for sure. Holds my phone much better than the RAM X-Grip it replaced.

Sponsored