Academyguy12
Member
Nope, not one bit. But it didn’t work in the as shown in the instructions position eitherAnd yours is working with no issues?
Sponsored
Nope, not one bit. But it didn’t work in the as shown in the instructions position eitherAnd yours is working with no issues?
From what I recall reading it appears to work either direction.So I don't remember seeing this answer and I've been following the complete thread. Have we determine that the controller needs to mount as received or as shown in the awesome directions.
Iowa clay mud, Alaskan mud or Arizona red mud?I'm glad this is so clear. As MUD!!!!!
Yes!Iowa clay mud, Alaskan mud or Arizona red mud?
Right, that's how you set it for automatic braking, right? But what I'm curious about is after you set it, can you then manual brake to a different setting? So on a normal controller you have the dial to set the auto maximum, and you have a separate lever to manually brake proportionally.
My knob turned with ease. The detent felt clear and concise. You can almost hear it click as you turn it.I'll have to try it with this controller, but my 1500 pound Aluma tilt bed car hauler (1600 with spare, tool box and tools) needed 4 to stop smoothly with the Redarc. So maybe this one is close in the numbers. Won't matter, I'll have to test once the weather settles and I hook up again.
The detent in mine isn't easy to feel. The knob turns hard enough (not real smooth) and the detents aren't pronounced very well but it will definitely hold setting better than the Redarc which had no detent and turned waay too easy. It was too easy to change by just brushing against it.
after much debating with the dealership about the wire harness and ECU flashing they were trying to get me to pay for. They came across this STAR report.
Bottom line they are aware the controller isn’t working and there is no fix currently
Mine was built February 2020. I haven't ordered controller yet. Does that mean my truck should be good to go if I buy mopar controller?
So I don't remember seeing this answer and I've been following the complete thread. Have we determine that the controller needs to mount as received or as shown in the awesome directions.
This was my guess as well, but we’d probably have to have someone with a later build truck check it out with a multimeter to verify. I saw someone post elsewhere they have a later build truck that works fine, but no trailer brake lights with the manual button. This is the exact same behavior as the diode equipped harnesses on the older models, which leads me to believe that the newer ones do indeed have a diode or similar on the truck side.Did they actually fix the problem, or just build a diode into the truck harness?
Again I wish I had full wiring diagrams for the trailer circuits as there are relays for the trailer lights - trailer park, left and right turn, backup, etc. - I see those can be set to active or inactive in the system.This was my guess as well, but we’d probably have to have someone with a later build truck check it out with a multimeter to verify. I saw someone post elsewhere they have a later build truck that works fine, but no trailer brake lights with the manual button. This is the exact same behavior as the diode equipped harnesses on the older models, which leads me to believe that the newer ones do indeed have a diode or similar on the truck side.
I can feel the detent, but it's not clean and crisp. It feels like it's rubbing on plastic. They aren't definite and there's no sound to it, it sort of "falls into a dip" of sorts but isn't locked solidly into a detent.My knob turned with ease. The detent felt clear and concise. You can almost hear it click as you turn it.
Info for my JT.
2020 Gladiator Rubicon
LED lights
Auto trans
Tow package
Passive entry but no Adaptive CC or Blind spot detection
My MDH is 010811, So Jan 8th for build date?
User | Errors? | Build date | ACC? | LED lighting? |
jaxmax | N | 08/21/20 | N | N |
Pitch | N | 08/20/20 | Y | ? |
Aberk | Y | 06/09/19 | Y | Y |
atoy74 | Y | 07/09/19 | Y | Y |
kclendaniel | N | 09/11/20 | Y | ? |
jeepfitter | N | 11/17/20 | Y | Y |
jwilson2899 | Y | | | |
ShadowsPapa | Y | 11/09/19 | Y | Y |