What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[HooliganActual]

Maybe, I’ve figured out the position and angle of the stabilizer? I cycled the steering so many times checking and adjusting that I wore down the asphalt on the driveway. I ended up with the reservoir angled down and back to get it out of the way of the track bar and drag link. We’ll see how it goes.

That's basically how I had to position mine as well

Sponsored

 

[WILDHOBO]

That's basically how I had to position mine as well

Thanks very much for that. I’m still apprehensive that I’ll trash it when I go offroad. You have the same one?

 

[Bruticus Maximus]

Drove from Northern California up to Northern Washington to pick up my Lone Peak Camper.

Is it still easy to remove the Freedom Panels? I noticed the Lone Peak extends further out over the cab.

 

[antwon412]

Is it still easy to remove the Freedom Panels? I noticed the Lone Peak extends further out over the cab.

Yes it is. I removed them for a while when we took a trip through Zion National Park. The camper extends maybe a third of the way over the freedom panel. So you can still get a decent view and feeling of it being open.

 

[KevinM60]

Due to excess metal contamination the dealer is replacing my engine complete under warranty.
The aftermarket skid plates aren’t covered in the warranty so I either had to pay them $450 to remove them or do it myself.
This morning they pulled it off their lot and I crawled under and removed the skids.
They have definitely been doing their job.

I’m supposed to have the Glad back by the end of next week.
looks like I have some crossmember straightening to do before I put them back on.

 

[Camaroboi13]

This morning I put my Amazon molle in the bed to mount my Amazon traction boards so they stay nice and tight under my Amazon tonneau cover. Damn you Jeff.

And yes, ALL my recovery gear is lime green. From straps, hooks, jacks, everything. There will be no problem wondering who’s using who’s stuff on the trails

 

[KevinM60]

This morning I put my Amazon molle in the bed to mount my Amazon traction boards so they stay nice and tight under my Amazon tonneau cover. Damn you Jeff.

And yes, ALL my recovery gear is lime green. From straps, hooks, jacks, everything. There will be no problem wondering who’s using who’s stuff on the trails

That makes for high visibility in the camera shots too.

 

[Camaroboi13]

That makes for high visibility in the camera shots too.

Ain’t that the truth

on a side note, if anyone knows where I can find a lime green fire extinguisher

 

[SnazzGlad]

Wash and took the doors off yesterday. So decided to take a personal day off work today. I needed some Jeep therapy.

 

[RudeJeepin]

This morning I put my Amazon molle in the bed to mount my Amazon traction boards so they stay nice and tight under my Amazon tonneau cover. Damn you Jeff.

And yes, ALL my recovery gear is lime green. From straps, hooks, jacks, everything. There will be no problem wondering who’s using who’s stuff on the trails

Easier to find in low light I'd bet also.

 

[chorky]

watch

Just posting in case nobody has see the Jeep expedition crossing the Darian Gap

 

[NonHyphenated American]

A little of this and a little of that. I did have to reset my draglink and tie rod as they wandered over the 2700 mile tour of the western states we just did. Bought the oil and filter to change but ran out of time before I had to go put new shoes on her.

37x12.50 Yokohama Geolandar X-AT’s. Pretty sweet and a nice change from the Toyo Open Country R/T’s I have been running on all 3 of my Jeeps.

The Wrangler on the other side got new 35” Toyo R/T’s today as well!!! I may have to un-retire to pay them off.

Where did you get those D-rings for the front bumper?

 

[b-roc]

Just returned from a long drive to pick up a new plastic badge for the Jeep. It was amazing!

 

[FL Robert]

Where did you get those D-rings for the front bumper?

These are similar ones I put on my Mojave
https://www.jeepgladiatorforum.com/forum/threads/2024-mojavicon-to-be.80111/post-1332042

 

[JTzntz]

Where did you get those D-rings for the front bumper?

A company called FrogFab in Canada used to make some like that. I have a set from them, but not sure from where @HooliganActual got his

Sponsored